Setting up configurations

Adding a device

Click Add, below the project tree. A menu of possible device types opens. The following device types are available:

• 52/XC: adds a 52/XC mixing device, which can be used with all Series 52 control modules (52/MX, 52/RX, 52/SX, 52/DX)

• 52/RM4200D: adds a mixing device based on RM4200D DSP frame with a Series 52 communication controller (RM420-852B, RM420-853B). A new device appears in the project tree. On the Options tab, select 52/MX or RM4200D in the Console type list. It depends on which console type you are using with your device. (see also Device Properties / Options)

• 52/XR Router: adds a 52/XR Routing Device to the project.

• 52/SX Config: adds a 52/SX mixing device, which can be configured by the SXConfig configuration assistant.

  tip

  For information about the configuration of a 52/SX device, see 52/SX Mixing Console Manual which is available on our Website as Online Manual or PDF version.

• 52/DX Config: adds a 52/DX mixing device, which can be configured by the DXConfig configuration assistant.

• Third Party Device: adds further devices to the project, which the DHD mixing and routing systems are able to communicate with. These devices can not be configured using Toolbox5.

Click Remove to delete a selected device from the Project.

Alternatively, you can add devices using the context menu by right-clicking on the project tree or the area around.