Skip to main content
Version: 7.4

Console Illumination | TB5 v7.4

note

Function only available in TB5 v7.4.

Default Illumination Level​

You can set the default brightness of the hardware buttons, OLED Displays or TFTs by changing the Default Illumination Level. Choose one of three default illumination levels:

  • Maximum Brightness
  • Standard
  • Dimmed Preset value is Standard.
warning

Using the Maximum Brightness value accelerates the wear and tear of OLED displays.

Auto Dim Function​

  • Auto Dim Function allows to use automatic dimming of the console. Select the Enable dimming check box to configure the corresponding parameters.

  • Dim after XX min of inactivity sets the time, when the initial dimming step will be done, if there is no activity at the console.

  • Lower Dim level after each XX min of inactivity lets you set the time until the next dim levels will be set.

  • Lowest Illumination Level lets you set the lowest automatic dim level.

Auto Dim Function - example settings

note

When the Auto Dim Function is used in combination with the Lowest Illumination Level: Off at least one Brightness Key with value 1-3 is required as push button on the console surface.

note

When the Console surface additionally uses different Access Groups (Access Group 2-4) and the Auto Dim Function is used in combination with the Lowest Illumination Level: Off, at least one Brightness Key with value 1-3 is required as push button on the console surface per Access Group in use.

note

All RM4200D, 52/SX and 52/DX do not support illumination levels. In those cases the Auto Dim Function or Brightness control keys should not be used.