Operation Mode
Select the Operation Mode tab to adjust general settings for the currently selected device.
| Area | Option | Description |
|---|---|---|
| PFL1 Options | Mix | - Enables that several channels can be simultaneously routed on PFL1. If unchecked, activating PFL on one channel deactivates active PFL on another. |
| Reset | - If any channel's fader in PFL mode is opened, resets all active PFL1 routings. | |
| Reset Channel | - If a channel is routed on PFL1 and its fader is opened, resets the PFL1 routing for that channel. | |
| Return | - If a channel is routed on PFL1 and its fader is opened, resets the PFL1 routing; closing the fader reactivates PFL routing. | |
| AFL when Fader On | - Automatically toggles monitoring mode from PFL to AFL if a channel's fader is opened (Faderstart ON). | |
| PFL2 Options | Mix | (Same as PFL1 Options Mix) |
| Reset | (Same as PFL1 Options Reset) | |
| Reset Channel | (Same as PFL1 Options Reset Channel) | |
| Return | (Same as PFL1 Options Return) | |
| AFL | - Enable the AFL monitoring mode for PFL2. | |
| Note: Function only available in TB5 v7.4. | ||
| DJ PFL | - Allows predefined fader position via PFL2 for next Channel Start (alternating to 0). | |
| - Requires defined PFL2-Bus. | ||
| - Resets predefined fader position after Fader Start. | ||
| Bus Options | PGM2 follows PGM1 | - Routings to program bus 2 automatically follow those to program bus 1 (does not work vice versa). |
| - Example: You route a channel to program bus | ||
| 1. This channel is automatically routed to program bus | ||
| 2. If you disable the routing to program bus 2, the routing to program bus 1 remains. | ||
| Off Air Options | "Fader Start On" blocks "Off Air" switch off | - Channels can only be routed from Off Air to On Air mode if faders are closed. (See also Control Modules / Auto OffAir) |
| Switching "OffAir" off moves Fader to -∞ dB | - If "OffAir" is activated on the channel, the Fader moves to -∞ dB. | |
| Note: Function only available in TB5 v7.4. | ||
| Allow switching "Off Air" state when "Fader Start On" | - Ignores "OnAir" protection of all channels and activates Off Air if pressed. | |
| Note: Function only available in TB5 v7.4. | ||
| Clean Feed Options | On Preparation Reset | - If the channel is in preparation mode, automatically disables preparation mode when fader is opened. Prevents switching back to preparation mode after fader closure. |
| Channel On Options | Extend Channel On when | - Corresponds with key functions Channel ON (Ext), Channel OFF (Ext), and Channel ON/OFF (Ext). Click Select to assign a logic source that switches between Channel ON/OFF functionality and Channel Start ON/OFF. (See also Control Modules / Auto OffAir) |
| Access On Options | PreFader signal sent to selector | - All available selectors are shown. Choose a selector to which the PFL signal is routed when Access key is pressed in a fader channel. |