Skip to main content
Version: 10.1

Firmware

The Firmware page gives an overview of firmware operation state and device information generated by firmware.

Firmware Page

On the firmware page, the following information is displayed:

  • Firmware Version: displays if a valid firmware license is available.
  • Serial Number: serial number of the series 52 core device. Required for generating the firmware license and for unique hardware identification.
  • Serial Number 52-7006 (XC2 / XD2 / XS2): serial number of the main processor module.
  • MAC-Address: MAC address of the ETH interface on the series 52 core device.
  • Hour Meter: total operation hours of the series 52 core device.
  • Firmware Uptime: firmware operation time since the last firmware reset or device reboot.
  • Cycle time: debug information for DHD support.
  • Running as: redundancy information, only relevant on XD2 systems.
  • Restart Reason: debug information for DHD support.
  • System Frequency: internal system clock frequency.
  • Sync Source: active sync source (1, 2, or internal). For source configuration, see Toolbox, synchronisation settings.
  • Sync Source 1 State: displays if sync source 1 is active.
  • Sync Source 2 State: displays if sync source 2 is active or available.
  • Temperature: core device temperature, taken from the core processor.
  • Power 1 State: power 1 state (up / down). Only displayed if PSU is configured in Toolbox. Will result in an alert if down.
  • Power 2 State: power 2 state (up / down). Only displayed if PSU is configured in Toolbox. Will result in an alert if down.

Advanced Information Overlay​

note

Information provided here is mostly debug information for DHD support.

Module State​

Module State provides a list of all connected modules to the core directly or to concentrators. Module Information can contain (if available):

  • Module Type
  • Internal Address
  • Module ID (ModID)
  • Module uptime
  • Module serial number
  • Module temperature
  • Module name from toolbox configuration
note

Information provided here is mostly debug information for DHD support. Use Port State instead.

Port State​

Port State provides information on all hardware ports of the core and all concentrators. It also lists all virtual connections made via the ETH port.

warning

In order for port state to work correctly, you must have Enable TFT Auto Assignment activated in Toolbox configuration, Device Options. Manual TFT assignment can lead to non-unique module IDs, which is not recommended.

Port State Page

The information is displayed per device in a table, containing:

  • Port: The physical port of the core or concentrator.
  • Module: The type of the connected module as from Toolbox configuration.
  • ID: Module ID as expected from Toolbox configuration.
  • Name: Module name as from Toolbox configuration.
  • Link: Link state (Up / Down), power delivery (bolt) icon, data connection (link) icon.
  • Uptime: Module uptime (time since the module was connected).
  • Temp: Module temperature, taken from module processor.
tip

Modules that are configured but not connected will still have their module ID displayed in the table.

For more advanced information on the module click chevron icon to open the module information overlay. Here the following information is displayed:

  • Firmware Version: version of the module's individual, internal firmware.
  • Uptime: Module uptime (time since the module was connected).
  • Temperature: Module temperature, taken from module processor.
  • Module ID: Module ID as expected from Toolbox configuration.
  • Serial: Serial number of the module.
  • Internal Address: only debug information.
  • Format: Connection type.
note

Values are only displayed if available. Some information is not available on all modules.

Serial Numbers​

note

Information provided here is mostly debug information for DHD support.